Jbl go 3 charger how to#
Jbl go 3 charger Bluetooth#

The status lamp lights up solid red on the speaker when it receives power from the adapter. The speaker while charging, showing the red status lamp glowing, near bottom of this picture.

Now that we connected the JBL Go 3 and our USB charger, we then plug the adapter into a working AC outlet, as shown next. Plug the USB Adapter into a Working Wall Receptacle In this demo, as said earlier, we’re using an iClever USB AC adapter along with the cord that came with this speaker. Next, connect the A end of the USB power cable to the power adapter. Plug the Other End of the USB Cable into your Charger Adapter Left side view of the JBL Go 3 speaker, showing a USB-C cord plugged into the charging port. Then, plug the mating end of your USB-C charge cable into the matching port on the speaker, as displayed in the next shot.

Jbl go 3 charger how to#

Plug in the USB-C Cord to the Speaker to Continue with How to Charge JBL Go 3 Showing the dark status light.īut depending on how much above-and-beyond recharging capacity your charger delivers, The speaker might charge faster when turned OFF, especially when using lower current chargers.Ĥ. Note that the Go3 still charges when energized, when powered ON or OFF. Power Off your Go 3 JBL Speaker (Optional) Left side of the JBL Go 3 mini speaker, showing the USB-C power port highlighted. Find the USB Type C Port on the Speakerįind this USB-C charging port on the left side panel, beside the carrying loop, as shown next, pointed at by the yellow arrow. iClever IC-TC02 Two Port USB Wall Charger, showing the label side view. Thus this adapter outputs plenty enough current to do this job well. Now as mentioned earlier, the Go 3 needs 5 volts at roughly 1.0 amps to recharge fully in the specified time of 2.5 hours. Please see our iClever Dual USB Wall Charger IC-TC02 Review post for more details on this excellent USB AC charger. In this case, we’re charging our speaker with an iClever dual port USB AC charger adapter, as shown next.

Jbl go 3 charger Bluetooth#

How to Charge JBL Go 3 Bluetooth Speaker 1. So it’s ready to play once more for up to five hours before needing another recharge. Then, plug the charger into a working wall outlet.įinally, after a few hours, your JBL Go 3 finishes charging. Next, connect your cable between the speaker and that adapter. JBL includes one such cable with this speaker. Indeed, you may use older chargers with USB-A style plugs, so long as they provide the 5 volts at 1 amp (5 watt) power level, and you have a USB-C to USB-A cable. Also note that while this unit accepts a USB type C plug for charging, you do not necessarily need a USB-C charger. In summary, pick a strong enough USB charger adapter, as no charger comes with the Go 3 speaker. Note that you can still play your Go 3 while it charges. Here, we detail this charging procedure for these mini beach ready waterproof speakers. Do this simply through the USB power in port on the right side panel. This piece covers how to charge the JBL Go 3 Bluetooth speaker.